- Hardened and ground Z-axis guideway
- Spindle mount Camlock DIN ISO 702-2 No. 8
- Precisely crafted sled
- Handwheels with adjustable fine scale 0.04 / 0.02 mm
- All guides can be adjusted by wedge strips
- Waves and wheels running in oil bath
- Adjustment range upper slide ± 90 °
- Guaranteed concentricity of the spindle nose better than 0.015 mm
- Main spindle running in oil bath
- Gear wheels smooth, hardened and ground with 2 adjustable precision tapered roller bearings
- Clear selection lever for switching the feed rates
- Closed design of the rapid-action feed gear
- Gears and shafts hardened and ground in an oil bath in precision bearings
- Handwheels decoupled and tested according to EN 23125
- Two-channel right-left switch tested to EN 23125
- Switch with life cycle calculation, tested according to EN ISO 13849
- Right / left rotation on bed carriage via switching spindle switchable
- Central lubrication in the bed slide
- Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN
- leading spindle
- Emergency stop blow switch, motor protection switch, lockable main switch
- Emergency stop device with foot control
- Safety handwheels with release function in the X-axis
- Tailstock for taper turning ± 10 mm adjustable
- Tailstock quill and handwheel with adjustable fine scaling
- Tailstock crank for position change
- Tailstock quill with two adjustable ratios 1/4 or 1/1 turn
- LED machine lamp
- Fast feed - pushbutton and selector lever for activating the rapid traverse for plan and longitudinal direction for even more efficient work. Does not switch off the entire machine when retracting into the limit switch
- Safety limit switch with positive opening contacts
- Electric engine brake with fast emergency stop - in normal operation fast stop without caster
- Electrics with Siemens components
- Energy chain for gentle line and hose routing
- Quick change steel holder SWH 9-D
- 1 steel holder 41 x 180 type D for square chisel 32 mm
Digital position indicator DPA 21
- Significant reduction in production
- glass scales
Dimensions and weights |
---|
Load bearing capacity | 1,4 t/m |
Length approx. | 3650 mm |
Width/depth approx. | 1500 mm |
Height approx. | 1785 mm |
Weight approx. | 3345 kg |
Electrical connections |
---|
Total rated value | 10 kW |
Electrical Data |
---|
Supply voltage | 400 V |
Mains frequency | 50 Hz |
Fast motion speed |
---|
Rapid motion | 3800 mm/min |
Explanations about rapid motion | Max. 5 min (30 min break) |
Feed |
---|
Longitudinal feed range | 0,044 – 1,48 mm/rev |
Number of longitudinal feeds | 25 |
Flat feed range | 0,022 – 0,74 mm/rev |
Number of flat feeds | 25 |
Pitches |
---|
Metric pitch | 0,45 – 120 mm/rev |
Number of metric pitches | 54 |
Imperial pitch | 80 – 7/16 Gg/1" |
Number of imperial pitches | 60 |
Diametrical pitch | 7/8 – 160 |
Number of diametrical pitches | 42 |
Modular thread pitch | 0,25 – 60 mm/rev |
Number of modular thread pitches | 46 |
Speed range |
---|
Number of gears | 16 |
Speed range | 25 – 1600 min¯¹ |
Spindle |
---|
Spindle chuck | Camlock DIN ISO 702-2 No. 8 |
Spindle bore/rod passage diameter | 105 mm |
Spindle cone | Ø 113 (cone 1:20) mm |
Tool holder max. chuck height | 32 mm |
Tailstock |
---|
Chuck | MK 5 |
Quill stroke | 235 mm |
Quill diameter | 90 mm |
Travel |
---|
Travel upper slide | 230 mm |
Travel cross slide | 368 mm |
Travel carriage saddle | 1965 mm |
Work areas |
---|
Max. height | 330 mm |
Max. width | 2050 mm |
Swing diameter above machine bed | 660 mm |
Swing diameter in bed bridge | 900 mm |
Swing diameter above planing slide | 440 mm |
Turning length in bed bridge | 250 mm |
Bed width | 400 mm |
Cooling lubricant system |
---|
Coolant pump output | 150 W |