Optional (sold separately): HAA2866/TAG - HAA2866/TAG2
Product basic info
Instruction manual languages: English
Primary colours: Grey
Additional colours: Black
Depth unit: 3.5 cm
Height unit: 12.6 cm
Width unit: 7.5 cm
Weight unit: 200 g
Material: ABS
Electrical data
Current rating range: 60-150 mA
General data
Specifications extra extra:
- programmable intelligent Egress button controls with options of delay, warning and button contacting possibilities of momentary or holding contact
- common user PIN, group user PINs & private user PINs for working with the EM card for various levels of security enhancement
- ON-OFF selectable for pacifier tone, standby flashing LED & keyboard back-lit lighting
- input terminals for door position sensor, Egress button & output, 1 inhibit control
Specifications extra:
- 50 visitor codes for output 1; one time use or valid for 1 up to 99 hours
- over 100 million combinations for user PINs
- superuser code operates all outputs and also sets or resets 'inhibit' for output 1
- Wiegand data output for the valid entry of PINs (34 bits) & reading of EM cards (26 bits)
- sole reader mode provides Wiegand data output for all PIN entries & card readings
- data I/O port in split-decoded operation
- card reader compatible with all the standard 125 kHz proximity EM cards & key fobs
Specifications:
- open collector outputs for the duress, alarm, key active, inter-lock & output 3, 100 mA sink / 24 Vdc maximum rating
- tact switch back-lit key board
- operated with PINs & EM card
- stand-alone or split-decoded operation
- stand-alone electric lock or inter-lock installation
- door opening and alarm arm/disarm control
- extremely long programmable timer for output relays: 1 second up to over 24 hours
- users for output 1: 1000 (PINs and/or cards) + 50 duress codes
- users for output 2: 100 (PINs and/or cards) + 10 duress codes
- users for output 3: 100 (PINs and/or cards) + 10 duress codes
Technical data
Weatherproof: Yes
Tamper switch: NC dry contact 50 mA / 24 VDC
Output relay specifications:
- output relay 1: solid state relay, fail-safe of fail-secure selectable, 3 A / 16 VDC max.
- output relay 2: standard NC + NO dry contacts 1 A / 24 VDC max.
- output relay 3: NO dry contact for doorbell button, 1 A / 24 VDC max.
Environmental data
IP rating: IP45
Operating temperature range: -20-70 °C
Humidity: 5-95 %
Power supply
Input voltage rating VDC range: 11-15 V
(EN)